Compact, light and powerful
- light-duty drainage pumps
...more information

• discharge bore 50 mm
• top discharge  
• semi-vortex / open type impeller  
• 230V, 110 V / single phase / 50Hz
• motor output 0,48 - 1,50 kW  
• 2 poles  
• motor protector, dry running  

Light duty drainage pump,
equipped with spiral casing and high performance motor
...more information

• discharge bore 50 - 80 mm  
• side discharge  
• semi-vortex impeller  
• 230V, 110V / single phase / 50Hz  
• motor output 0,4 - 0,75 kW  
• 2 poles  
• motor protector, dry running  

Light duty agitator pump,
equipped with spiral casing and high performance motor
...more information  

• discharge bore 50 mm  
• side discharge  
• semi-vortex impeller  
• 230V, 110V / single phase / 50Hz  
• motor output 0,55 kW  
• 2 poles  
• motor protector, dry running  

Compact and powerful
- light-duty drainage pumps
...more information

• discharge bore 50-80 mm  
• top discharge  
• semi-vortex impeller  
• 230V single phase / 50Hz  
• motor output 2,2kW  
• 2 poles  
• motor protector, dry running  

Ideal for removal of 
residual water down
to 1 mm
...more information

• discharge bore 25 mm  
• top discharge  
• vortex impeller  
• 230V, 110V / single phase / 50Hz  
• motor output 0,48 kW  
• 2 poles  
• motor protector, dry running  

Greatly increased maximum submersion depth due to mechanical seal resistant to high pressure
...more information

• discharge bore 50 - 150 mm  
• top discharge  
• open type imp eller  
• motor output 1,5kW - 11kW  
• 400V / 3-phase / 50Hz  
• 2 poles  
• motor protector, dry running  

Use of new materials has resulted in lighter weight and even better resistance to sandy water than those of conventional equivalents
...more information

• discharge bore 50 - 80 mm  
• top discharge  
• semi-vortex impeller  
• motor output 0,75kW - 5,5kW  
• 400V / 3-phase / 50Hz  
• 2 poles  
• motor protector, dry running  
• level sensor optional   

Representative multipurpose pumps
equipped with a 4-pole motor
...more information

• discharge bore 100 - 250 mm  
• top discharge  
• open/closed type impeller  
• motor output 3kW - 22kW  
• 400V / 3-phase / 50Hz  
• 4 poles  
• motor protector, dry running  

High Head Pump - Slim Design
High water pressure resistance (50m H2O) makes it adaptable in
deep wells. Top discharge with center flange, efficient motor cooling by water jacket, dual impeller
...more information

• discharge bore 50 - 80 mm  
• top discharge, center flange  
• closed type impeller  
• motor output 3,0kW - 22kW  
• 400V / 3-phase / 50Hz  
• 2 poles  
• motor protector, dry running  

High Head Pump -
Increased endurance to water pressure enables use in deeper wells. A mechanical seal withstanding water
pressures of up to 5 bar (50mH2O) is used in all types
...more information

• discharge bore 100 - 200 mm  
• top discharge, center flange
• closed type impeller
• motor output 15kW - 90kW  
• 400V / 3-phase / 50Hz  
• 2 poles  
• motor protector, dry running  

High Head Pump - equipped with a 4-pole motor for an increased lifetime
...more information

• discharge bore 250 mm  
• side discharge
• closed type impeller
• motor output 75W  
• 400V / 3-phase / 50Hz  
• 4 poles  
• motor protector, dry running  

A powerful slurry pump series using KTV pumps as a base. Features high wear resistance, durability and extra light weight, equipped with agitator.
...more information

• agitator  
• discharge bore 50-80 mm  
• top discharge  
• semi-vortex type impeller  
• motor output 2kW - 3kW  
• 400V / 3-phase / 50Hz  
• 2 poles  
• motor protector, dry running  

Tsurumi's typical slurry pumps with a 4-pole motor and agitator for an increased lifetime and greater convenience.
...more information

• agitator  
• discharge bore 80-150 mm  
• top discharge  
• open type impeller  
• motor output 4kW - 9kW  
• 400V / 3-phase / 50Hz  
• 4 poles  
• motor protector, dry running  

A special-steel impeller and suction plate have greatly increased the pump's life.
The casing is designed to have wide passing area, thorough thickness
and antiabrasion material.
...more information

• agitator  
• discharge bore 80-100 mm  
• side discharge  
• open type impeller  
• motor output 5,5kW - 11kW
• 400V / 3-phase / 50Hz  
• 4 poles  
• motor protector, dry running  

All pumps in this series provide very smooth passage of sandy earth and slime. A forcibly cooled motor ensures long and continuous pump operations exposed to the air.
...more information

• agitator  
• discharge bore 80-100 mm  
• side discharge  
• open type impeller  
• motor output 2,2kW - 11kW  
• 400V / 3-phase / 50Hz  
• 4 poles  
• motor protector, dry running  

In the event of abrasive and corrosive utilization, stronger wear and tear will take place naturally in certain components. In this regard, please pay attention to our website
www.tsurumi-europe.com/englisch/applications